FS-6 Foot Switches with Emergency Stop

Overview
Selection Guide
Products List
Download

Features:

* Robust aluminum alloy die cast body
* Choice of different type of contact blocks
* Water-proof to IP65(IP67 available on special request)
* Galvanically separated contacts
* Screw terminals with self-lifting clamps for easy wirting
* Positive Opening of NC contacts
* Safety reset option available
* UL/CUL approval(E216958)
* Threaded Hole available in:PG 13.5,m20x1.5 and 1/2NPT

Installation dimensions:

Specifications:

Operating Frequency:	60 ops/min
Insulation Resistance:	>100mΩ@500VDC
Contact Resistance:	<25mΩ
Rated Current/Voltage:	10A/600V AC A600/AC15 Q300/DC13
Inrush Current Complies:	with IEC947-5-1:AC15/DC 13
Dielectric Strength:	1000VAC for 1 min between current carrying parts 2500VAC for 1 min between non-current carrying parts
Service Life:	Mechanically 1.0×106(operations) Electrically 5×105 (operations)
Operating Temperature:	-30~+80℃(-22~176°F)
Degree of Protection:	IP65 (IP68 available on request)

For example：FS-61	-G	-SP	-A	-S	-K	-A
Single pedal	Guarding options	Contact Block Type	Special Features	Switch Configuration	option	Conduit Type
	blank:No Guarded	SP: snap action	blank	blank:SPDT	blank	A: 1/2NPT
	G: Fully Guarded	SL:slow action break before make	A: Anti-tripped	T:DPDT	K:Gold plated contactcs	B:PG13.5
		SL1:slow action make before break		S: 2 stages		C:M20x1.5

Operating sequence:

"OFF" Step 1:the pedal is not depressed.The contacts are open.The machine is turned off.

"ON" Step 2:To start the machine,the pedal must be depressed until the "pressure point",where resistance is noticeable.

"EMERGENCY-OFF" Step 3: In an emergency,if the pedal is depressed beyond the pressure point,the machine will stop.

Beyond the pressure point,the contacts are locked in the "OFF:-Position.The machine cannot operate at

this time.Note:The machine can also be stopped,by releasing the pedal in stead of depressing harder (Black to step 1)

"RESET" Step4: The push button on the side of the foot switch must be pushed by hand to enable the foot switch to start the machine function again.

"ON" Step5:Return to condition described in Step 2.

FS-61G-SP-C-R

FS-62G-SP-C-R

NO.	Subject	PDF Download
1	FS-6 Foot Switches with Emergency Stop	Download